<strong>Famous How To Replace A Heat Only Electronic Home Thermostat References</strong>. Web remove the existing thermostat base by loosening the mounting screws. Web check the plate with a level, and mark the screw holes with your pencil.
Table of Contents
Table of Contents
Warm Air Comes Out Of Vents Or Registers.
Set the temperature to your new digital. To see if your house has a c wire,. Begin by installing the base first.
Remove The Outside Access Covers.
Drill the holes, and screw the. Use a 1/4 inch nut driver or flathead screwdriver to remove the access cover from the upper and lower thermostat. Hold the new thermostat's mounting plate up to the wall to check whether you need to drill.
Disconnect The Two Wires Coming From The Furnace/Boiler, Then Reconnect Them To The New Thermostat.
Some thermostats have small screws holding the wires in. Turn on the power to your furnace. Web align the new mounting plate over the hole.
The Next Step Is To Remove The Thermostat Wires From The Backplate.
Web remove the existing thermostat base by loosening the mounting screws. Web here are some things to think about before deciding to upgrade: Web to see whether your equipment will work with a nest thermostat, use the nest thermostat compatibility checker.
Web Put Up The Replacement Wall Plate, If There Is One.
Install the new thermostat’s wall plate. Web check the plate with a level, and mark the screw holes with your pencil. Two wires may not be enough.
